It could be dust or dirt on the encoder; I had that same problem with mine, and it went away when I opened it up and cleaned the disk.
I bought a maxnc 10CL back in January. For some reason it pauses briefly twice when cutting when it changes code. I have sent the mill back to max and they claim there's nothing wrong but it still does it and creates a low spot in the part I cut out. What could be causing this? It's doing it in the exact same spots every time
Similar Threads:
It could be dust or dirt on the encoder; I had that same problem with mine, and it went away when I opened it up and cleaned the disk.
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]