Kbmm-125. You can use it on your stock motor and on the 1100w if you decide to upgrade.
Check out hoss' page under projects for info.
I have a g0704 in converted to cnc using mach3. I have had good success, I am looking to convert the spindle to a DC DC tread mill motor. I have a couple 6000 rpm motors. any recommendations on what motor controller power supply to buy.
Similar Threads:
Kbmm-125. You can use it on your stock motor and on the 1100w if you decide to upgrade.
Check out hoss' page under projects for info.
Or if you want a little superior one that is quieter and smoother at low rpms's look for the KB PWM version over the SCR type.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.