Spindal Motor Connections


Results 1 to 2 of 2

Thread: Spindal Motor Connections

  1. #1
    Registered
    Join Date
    Mar 2017
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Spindal Motor Connections

    I have a 3 axis TB 6560 controller I want to connect a spindle motor to it, the outputs available are under output are GND,Pwm under relayM1 M2 I would appreciate any help.
    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Jun 2005
    Location
    USA
    Posts
    1723
    Downloads
    0
    Uploads
    0

    Default Re: Spindal Motor Connections

    bmartin7,
    That is meant to connect to a VFD and Spindle. The relays are used to control the spindle start and direction, and the PWM output is normally used to output a voltage between 0-10V which connects to the VFD as a speed input.

    Russ



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Spindal Motor Connections

Spindal Motor Connections