Emco retro fit VFD help

[DaxSmolensky]

Hello all I'm doing a retro fit on a emco pc 50 mill My question is can any body recommend a VFD for spindle that is originally on the mill. Here is a picture of spindle tag Thank you all

Similar Threads:

• Need Help!- emco turn 120p with emco tronic ti control
• EMCO PCTurn55 and EMCO PCMill50
• Problem- To retro or not to retro (fit)
• BP BTC II Retro
• TM-5 for Retro in OKC

[Jim Dawson]

These are nice drives and adjustable to your motor parameters. Good documentation.

https://www.automationdirect.com/adc..._SLV)/GS3-21P0

I have used a number of these.

[mactec54]

Hello all I'm doing a retro fit on a emco pc 50 mill My question is can any body recommend a VFD for spindle that is originally on the mill. Here is a picture of spindle tag Thank you all

Any brand name VFD will work for you 1Hp to 1.5Hp is all you need for your motor, you can run it with ease on single phase also, Teco have one that should be a good fit 1 Hp 120v single phase input 3Ph output