Does anyone have a roland camm-3 pnc-3000 manual?

[takky]

I won a pnc-3000 at an auction, but I don't know how to operate it. I have prepared software and a USB to serial conversion cable, but it does not work well, so I think I need a manual.

Similar Threads:

• Roland Camm-3 PNC-300
• Need Help!- Roland CAMM-1 pnc-1100 Plot Alignment Problem!
• Need Help!- Using 3D Engrave with Camm-2 PNC 2200-A
• Here is how to use G-Code with the Roland PNC-3000 CAMM-3 Benchtop Mill
• Camm-3 pnc-3000 for sale

[steryd]

Have U tried producer website?
https://www.rolanddga.com/support/pr...illing-machine
Not every usb to serial adapter will work with it. Surently MOXA or sth like that would. Ftdi's or profilic's or other dongle-like hardware may connect but they won't work properly.

[owenmarquardt]

The centronics cable should be used to connect it to the computer. A cad file was opened and printed using DeskProto after being post processed before being sent to the machine.



badland

[Raphae]

Determine the standard points for cutting each time with the PNC-300, which may be used with a varied range of workpiece forms and a large variety of tools pizza tower