A little interesting side note. When we built the Grizz,, there was a 'top heavy' concern which we somewhat addressed by adding heavy plate to the bottom of the toolbox/base. On December 21st there was a 6.4 earthquake here (Eureka, CA) that had a g-force of 1.4, which is ferocious, followed by many aftershocks as well as another 5.4 this morning. The Grizz wiggled but didn't take a dive, so that was a real plus for us. My shop, on the other hand looks like King Kong went nuts in there and I still haven't had the heart to start to clean it up.
Stuart
"THE GRIZZ" photo album - https://goo.gl/photos/yLLp61jooprtYzFK7
Youtube - https://www.youtube.com/channel/UCT2lq9obzEnlEu-M56ZzT_A
Glad to hear you all are ok ..kinda late but I'm just reading this new post. I come to this thread when I get stumped converting my benchtop mill and need ideas....thanks!!!A little interesting side note. When we built the Grizz,, there was a 'top heavy' concern which we somewhat addressed by adding heavy plate to the bottom of the toolbox/base. On December 21st there was a 6.4 earthquake here (Eureka, CA) that had a g-force of 1.4, which is ferocious, followed by many aftershocks as well as another 5.4 this morning. The Grizz wiggled but didn't take a dive, so that was a real plus for us. My shop, on the other hand looks like King Kong went nuts in there and I still haven't had the heart to start to clean it up.
Stuart