Question for those with a x2 belt conversion


Results 1 to 3 of 3

Thread: Question for those with a x2 belt conversion

  1. #1
    Registered
    Join Date
    Feb 2006
    Location
    us
    Posts
    1187
    Downloads
    0
    Uploads
    0

    Default Question for those with a x2 belt conversion

    With a belt conversion on a mini mill, is the draw bar for the spindle still accessible? And what does the nut that the spanner wrench actually do? And with the belt conversion is this still nut accessible? Also with the belt conversion you really don,t need any of the plastic spindle gears anymore, right?

    Similar Threads:


  2. #2
    Gold Member
    Join Date
    Jun 2003
    Location
    United States
    Posts
    1365
    Downloads
    0
    Uploads
    0

    Default

    http://www.littlemachineshop.com/pro...ProductID=2560
    If your talking about that one, theres a pic, you can see that the drawbar is accessable, the spanner nut is right under the drawbar, and thats what you use the spanner wrench for. I believe the spanner nut holds the front pully down. and no, you dont need the gears at all when converted to belt drive.


    Jon



  3. #3
    Registered
    Join Date
    Feb 2006
    Location
    us
    Posts
    1187
    Downloads
    0
    Uploads
    0

    Default

    Wow I didn,t think the spanner nut was holding the front pulley on. Kool now I know ... thanx



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Question for those with a x2 belt conversion

Question for those with a x2 belt conversion