Conversion or Retrofit Of light machines controller to artsoft Mach 3 - Page 2


Page 2 of 2 FirstFirst 12
Results 13 to 16 of 16

Thread: Conversion or Retrofit Of light machines controller to artsoft Mach 3

  1. #13
    Registered
    Join Date
    Apr 2008
    Location
    USA
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: Conversion or Retrofit Of light machines controller to artsoft Mach 3

    Quote Originally Posted by mhopkins74 View Post
    I got the control board on mine converted today. Hopefully this weekend I can test it out. Has anybody figured out how to do this modification to the tmc 1000 or pro light mill controller yet? Would save some money if one has.
    Hi,the pro light uses thew same controller ,I already convert one of this machines.



  2. #14
    Registered
    Join Date
    Jul 2010
    Location
    United States
    Posts
    40
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by lerma303 View Post
    Hi,the pro light uses thew same controller ,I already convert one of this machines.
    Have you the mods for x y and z axis for the mill lerma. It would be much appreciated. Or am I looking at it wrong. Your wiring conversion will activate all motors even on mills? I just got these and wanted to start on the lathe first.

    Last edited by mhopkins74; 08-16-2017 at 09:38 AM.


  3. #15
    Registered
    Join Date
    Jul 2010
    Location
    United States
    Posts
    40
    Downloads
    0
    Uploads
    0

    Default Re: Conversion or Retrofit Of light machines controller to artsoft Mach 3

    So on the prolight 3000 lathe, do you p0lug the db9 into the control box now to gain z axis control? I have 2 plugs in the db9 port of the control box. do I pull those out ? scratching my head a little.



  4. #16
    Registered
    Join Date
    Jul 2010
    Location
    United States
    Posts
    40
    Downloads
    0
    Uploads
    0

    Default

    Got x and z figured out through ports and pins in mach3. Spindle is not starting up through mach3 yet only manual. Any ideas?

    Thanks,

    Mike H.



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Conversion or Retrofit Of light machines controller to artsoft Mach 3
Conversion or Retrofit Of light machines controller to artsoft Mach 3