Update 12/30/2017 : Big Boy Pantalone's ON - Controller Box Power ON - "It's Aliiiiive!"
NO/None/Nada... wicked, not so magic smoke either !!!
Hats off to all the kind gents who gave enlightenment, wisdom. confirmation, inspiration and had patience putting up with so many of my rookie DAQ's.
SKMetal7
CNC4XR7
BIG BIG john-100 [ man ...what an ACE! ]
Automation Technologies
CNC4PC
.. many others Im sure
Humbled, Happy moment ... its all working and not smoking. Still a good ways to go yet but major milestone here...
Spindle Key Lock out switch - works like a champ
E-Stop - does its duty like a Boss
C2 - 110v Contactor does too [ man that thing is kinda violent - lol
Holding circuit / safety feature - rocks it - Sam - CNC4XR7 - you da man brother - great setup
Remote Panel [ yellow rectangle box ] working good - needs a coolant on / off rocker switch / a 90* liqui-tight cable gland / and a DIN or other type plug to finish off a few loose wires... WOOT ... That thing is a Cable / Conducter-A-Palooooza
Ive got a rather strong audible Clicking / Buzz coming off the C11GR BoB though - its Relay 3.... Which I may have a conflict due to the enabled SCHP - as it uses PIN 17 ... and Relay 3's jumper set to PIN 17 .... Relay 3 alternatively can be jumpered to PIN 1 [ PIN 17 or 1 are the only two options ] - but I have PIN 1 and a GND setup to control Coolant Power via SSR Relay.
Something is funky though ... as - when I disconnect the KBMM-125s main AC Line IN to the KBMM-125 - the Buzzing Sound ceases. All this of course makes the assumption that this card is NOT supposed to be "buzzing" ...