I was looking at that on the mini-lathe page. What would be the total cost after you buy the scales? Would be cheaper to buy a couple digital calipers and mount them on your lathe.?
Any have Dro scales on their mini lathe? I was thinking about add it to my MIrco mark lathe.
Similar Threads:
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
I was looking at that on the mini-lathe page. What would be the total cost after you buy the scales? Would be cheaper to buy a couple digital calipers and mount them on your lathe.?
My little piece of the web!
http://users.adelphia.net/~wjdupont
Here is a 12" scale-
http://www.littlemachineshop.com/pro...ProductID=2014
The dro kit is about 600.00.
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
Like I said thats alot of money to do it that way. considering the lathe only cost $300 dollars. Thats twice the cost of the lathe. In my own opionion Id buy 2 digital calipers from harbor freight for $20.00 dollar each and adapt them to the mini lathe. It will do the same thing for $40.00 dollars total and a little bit of time to adapt it to the lathe.
My little piece of the web!
http://users.adelphia.net/~wjdupont
They don't have 12" long calipers.
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
How about this. its 12 inch for $50.00 !?
http://www.harborfreight.com/cpi/cta...emnumber=47261
Then buy the $20.00 dollar one and you did it all for $70.00
http://www.harborfreight.com/cpi/cta...emnumber=47257
They are also Fluid-resistant . Seems like the easyest and cheapest way to me.. Just my opionion.
Last edited by WOODKNACK; 08-05-2003 at 01:27 PM.
My little piece of the web!
http://users.adelphia.net/~wjdupont
I just saw that.
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
How would you afix it?
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
I have seen people put these on there mills. One guy drilled a small hole thru the nose of each jaw on the caliper, he then screwed each jaw to a bracket he made that was fixed to the mill.
Seems to me you should be able to make it work this way?!
My little piece of the web!
http://users.adelphia.net/~wjdupont
I just got this one- http://cgi.ebay.com/ws/eBayISAPI.dll...ME:B:EOAB:US:6
Thank You,
Paul G
Check out-
[URL="http://www.signs101.com"]www.signs101.com[/URL]
let me know how the hook up goes. im going to buy my lathe this fall.
My little piece of the web!
http://users.adelphia.net/~wjdupont