FOR DRIVEN 300 OZ BIPOLAR MOTORS
i have 3 motors
and some one recommend good power supply for that
how max do u get with this motor and driver in rabid moves
I have a 1/2-10 5 start screw on the X-axis so it moves 1/2" per turn. I've had the x-axis up to 250 ipm, but it seems to be skipping steps at anything above 175 ipm. To be honest, I'm running the machine at 75 ipm to make sure I don't lose any steps. I'd rather wait a little longer for it to cut the parts out then destroy them, or have to stop the program, rezero it and start over.
As I use it more, I'll try raising this speed and see if it has any ill effects.