dissatisfaction

[functionbikes]

Hello everyone, I really did not want to write this but I am really at my wits end with the system that I purchased from kelling - I purchased the 1200oz nema 34 cnc 72v system, from the get go it has been nothing but problems, the first thing that went wrong was that the power supply never made it to me and I had to contact kelling to send me a replacement unit- okay I can deal with that,
I was finishing the machine that all these parts were going on. I then started to review the wiring schematic- these things are a way below acceptable -after trying to find a phone number for kelling and few emails that provided little help I am ready to send this package back.
the customer support for this product really needs help.
I was planning originally to use these on a few other retrofits but I am reconsidering that option.


1: NEMA 34 1200 oz-in Steppper Motors 3 Axis CNC Kit: $938

A:3 PCS KL-9082, 24V-90V, 8.2A Bipolar Driver

B: 3 PCS NEMA 34-1200 oz-in Stepper Motors

C: 1 PCS KL-7220, 72V(No load), Max 20A,Unregulated Power
Supply, 110V/220V

E: 5V Power Supply for Breakout Board

[Kelinginc]

Hi Sir,
Tell me your name and email or email us at support@kelinginc.net. We will help you to solve any problem. Every one can get this package work, I am sure you will. Here is a sample of wiring
http://www.kelinginc.net/KL-9082C25.pdf
Sample of assembled controller: http://www.kelinginc.net/3axiscontrollersample.pdf.

[functionbikes]

Jeremy little- ogd manufacturing

Functionbikes@gmail.com

[Kelinginc]

We have email you all the wiring and documents
It requires some electrical skills. if you need any info, pls let me know

[functionbikes]

well I got everything in order- it turned out that i had the step and the pulse wires switched- i feel really stupid i did not catch that one on all three axises