Some Better Keling Documentation

[Mogal]

I have the motors wired, powered the system, the motors lock and wont turn when I run a dxf in mach3. (system just sitting on the table, its not installed yet)

How can you test the PP cable? (mine is brand new outa the box)
Does the cable have to be bi-directional? (not sure if the one I got is)

I still get a forbidden msg with the link...

All power LEDs light up.
I have the 4030s set to 2.7 amps, and 1/8 steps.
I have the COM jumper of the C10 jumped set to COM= +5v
My Emerg stop doesn't respond in Mach3?

It maybe settings in mach3, not sure.
I have the port enabled, I've tried sherline 1/2 pulse mode, nothing...

Thanks

[tsmc00]

Hello Everyone,

After an exhausting search, I have found better quality information on Keling Drivers. The pictures in these manuals can be seen perfectly.

The company is Leadshine Technology in China. Their website is www.leadshine.com. Here is a link to datasheets and manuals http://www.leadshine.com/News/en/e_n...il1.asp?id=228

Thanks,

[ataxy]

leadshine website is reported as a phishing site please do not use this site or if you do do it at your own risk

i get warning about it both from firefox and nod32

here is the link to the google report of this site
http://safebrowsing.clients.google.c...leadshine.com/

[DonF]

The leadshine website has some very excellent documentation. Problem is it looks like the numbers dont cross. I cant find anything with the sams specs as my KL-6050 I think they must be an older design as most of those drives have more features. Anyone know that leadshine product number was rebranded to make the kl-6050?