Keling motors, drivers and power supply connections

[ataxy]

Originally Posted by Nitroghost IT WORKS IT WORKS. it was an incorrect jumper setting on the breakout board. I still need to tune the motors because it is slow, very slow. i guess that is because i am useing 1/4 inch all thread instead of the acme ones. just need more money i guess. But IT WORKS Jim

what jumper position do you have

[bluerobotkid]

Hi ataxy-
Im building a simillar machine off of the buildyourcnc.com site, I haven't bought my motors or controller package yet, but the enco threader rod was a good price, the nuts are 1.25 each or something, With the couplers and backlash nuts from dumptsercnc it was around $120. The Z and X axis turn real smooth by hand right now, it was a little more assembly and I had to make a bracket to mount the backlash nut to. I have pictures on my myspace page under user name bluerobotkid.

Are the 425 motors working well, the torque curve looks like it drops off at a slow rpm?

[rykegrey]

I bought the 495 ox-in 4 set package and got it all hooked up. I just wanted to let you all know that for my machine it worked out great. I have plenty of power. Just so you all know I have retro fit the Craftex B1976 Mill/Drill which is the same asall of the following: Clarke CMD 1225, Rong Fu RF 31, Grizzly G1005, King Grip16 or PDM 30.

Aslo remember that L on the wiring diagram is Live wire from 110v wall source, and N is Neutral.