VFD Help needed


Results 1 to 15 of 15

Thread: VFD Help needed

  1. #1
    Registered
    Join Date
    Apr 2007
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default VFD Help needed

    Hey guys need some info to get me started. Kl-vfd15 I can't seem to get it working. I have power, and have a Flashing display of A5R 1.0 5 could be a "S" but not sure. Only button that work's from here is the prog button, which then give's me flashing PD000, press prog again then i can use the arrow up and down buttons to change PD value. I can use the button >> to change digit postion and then arrow up down buttons, and that's it.
    Is their a combination of buttons together to push? don't know what the Jog button is for either. In info to enlighten me would be great.

    Ray

    Similar Threads:


  2. #2
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    24216
    Downloads
    0
    Uploads
    0

    Default

    You don't have a manual?
    What is the make of the VFD?
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  3. #3
    Registered
    Join Date
    Apr 2007
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Afraid not didn't come with a manual, although i was sent a pdf file, after i sent a message to keling support, but that's not helping me, it talks about pressing Enter, will this unit doesn't have Enter. So i guess the pdf file is genric.
    For the make of the VFD have no idea, it only has KL1500 stamp on the front.

    Ray



  4. #4
    Member jalessi's Avatar
    Join Date
    Feb 2007
    Location
    United States
    Posts
    4553
    Downloads
    1
    Uploads
    0

    Post

    Ray,

    Does this look like your VFD?

    Jeff...

    Attached Thumbnails Attached Thumbnails VFD Help needed-vfd-jpg  
    Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.


  5. #5
    Registered
    Join Date
    Apr 2007
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    No it doesn't look like that. Where you have F/R button, mine is a Jog Button. Where you have a Enter Button, mine is a Set Button.
    Also only my Power light come's on, the other's haven't come on at all as yet.

    Ray



  6. #6
    Registered
    Join Date
    Apr 2007
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Ive borrowed this from the woodwork forums. It's the best that i can find. At least it looks the same as mine, from what i can see.

    VFD Help needed-vfd-jpg



  7. #7
    Member jalessi's Avatar
    Join Date
    Feb 2007
    Location
    United States
    Posts
    4553
    Downloads
    1
    Uploads
    0

    Post

    Ray,

    I believe this is the model you have.

    Attached Thumbnails Attached Thumbnails VFD Help needed-vfd-jpg  
    Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.


  8. #8
    Member jalessi's Avatar
    Join Date
    Feb 2007
    Location
    United States
    Posts
    4553
    Downloads
    1
    Uploads
    0

    Post

    Ray,

    Here is the setup documentation.

    Jeff...

    Attached Files Attached Files
    Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.


  9. #9
    Registered
    Join Date
    Apr 2007
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Jalessi, thank you for VFD file it will be alot of help further down the track. But I really don't understand why, I can't progress any further than i have. Except for pressing the "Set" button and the Arrows up & down buttons i can't enter any other information into VFD. Pressing the other buttons don't have any effect on the unit. I had assume at factory settings the spindle should work, but it doesn't, I simply can't get passed a flashing digital readout. Am i missing something here??

    Ray



  10. #10
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    24216
    Downloads
    0
    Uploads
    0

    Default

    If you bought this new, I am surprised if you did not get a manuf. manual?
    All the VFD's I have worked on, a flashing display usually means there is an error of some kind or that something illegal operation is being performed?
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  11. #11
    Registered
    Join Date
    Apr 2014
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: VFD Help needed

    jalessi,
    I am looking for a manual on how to set up my KL-VFD15 as well. The Zip file you posted, is that for the HY02D223B model VFD? or is that for a KL1500VFD?



  12. #12
    Member jalessi's Avatar
    Join Date
    Feb 2007
    Location
    United States
    Posts
    4553
    Downloads
    1
    Uploads
    0

    Post Re: VFD Help needed

    Quote Originally Posted by dcolo View Post
    jalessi,
    I am looking for a manual on how to set up my KL-VFD15 as well. The Zip file you posted, is that for the HY02D223B model VFD? or is that for a KL1500VFD?
    Dcolo,

    See attached PDF for KL1500VFD manual.

    Jeff...

    Attached Thumbnails Attached Thumbnails VFD Help needed-vfd15-22-pdf  
    Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.


  13. #13
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: VFD Help needed

    raysul

    How have you wired the input terminals, can you do a photo

    Last edited by mactec54; 04-14-2014 at 07:46 PM.
    Mactec54


  14. #14
    Registered
    Join Date
    Apr 2014
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: VFD Help needed

    thank you so much! We are in the process of setting our table up now.



  15. #15
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: VFD Help needed

    dcolo

    What is the spindle Hz 400 or Hz 300 & the spindle motor Amps, Post these to numbers, & I will post all the settings you need

    Mactec54


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

VFD Help needed

VFD Help needed