Has anyone verified the SW4 setting? If so, which way sets it to half of the dynamic current? The reason that I ask is that there is an error in the manual. In Section 7 there is a small drawing that shows all 8 of the DIP switches in a row and what their function is (1-3 = Dynamic Current; 4 = Standstill Current; 5-8 = Microstep). The text below the figure says that SW4=ON is for half current. Later in the same section is a sub-section titled "Standstill Current Setting." In this sub-section it says exactly the opposite. SW4=OFF is for half current at standby. Anyone know which is the correct way?
Replying to my own thread with the answer in the event that someone needs it in the future. John at Leadshine thanked me for pointing out the ambiguity and advised that SW4 should be ON for 1/2 current at standstill.
Reply with Quote
SW4 Standstill Current
