Hi all,
I have a cad drawing and when it was drawn somebody has draw it in what seems to be 3d. It is supposed to be a 2d drawing.
Is there a way to reset all z axis co ordinates to 0 to make it a 2d drawing.
Couldn't work out what was going on when trying to produce gcode.
Thanks
Prboz![]()
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)