LinkBack URL
About LinkBacks
How about $20?
http://www.freefirestudio.com/outline.htm
Gerry
| | |
anyone know of a freeware program to turn text to dxf? hi
i would like a program that would let me type something and turn the text to a dxf file.
How about $20?
http://www.freefirestudio.com/outline.htm
Gerry
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I just tried this out, and it seems to work great. A bargain at only $20. I know a lot of people were looking for something like this a while back. Try it, you'll like it.
Gerry
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
And then there is the absolutly free DeskEngrave from Deskam
This little program will let you use any trutype font (including wingdings, ect) and will generate dxf or G-code for the test you enter. You can even put the text on an arc. And it's FREE.
deskengrave = very cool! Thanks!
Elefont, works in Windows. Produces triangulated DXF.
I use the freeware program "Stickfont" from NCPlot:
NCPlot - Stick Font
Allows you to create either a gcode or dxf file and comes with several fonts.
Art
AKA Country Bubba (Older Than Dirt)
Desk Engrave is nice, but its strictly single line. I do all my text in CamBam now.
Bob La Londe
http://www.YumaBassMan.com
Posting Permissions
| | |
