A buy a Isel CPM 4030 a few weeks ago, but there was no software included.
I searched the web and at the moment I try the KAY (remote) software, this is included into Galaad software.

I also installed Autodesk Fusion 360 for design some parts.
Into Fusion I post process my design to G-code NCP for Isel.

When I process the file with Kay the result is not what I have design. The milling is not milling the 3D content, but the complete workpiece in one

this is what I made as test in Fusion:

the result is that my name is also milled on -4mm like the space between the letters.
Only the frame is milled like on the model.

Has someone an idea what I did wrong.

Thanks a lot

Similar Threads: