A buy a Isel CPM 4030 a few weeks ago, but there was no software included.
I searched the web and at the moment I try the KAY (remote) software, this is included into Galaad software.
I also installed Autodesk Fusion 360 for design some parts.
Into Fusion I post process my design to G-code NCP for Isel.
When I process the file with Kay the result is not what I have design. The milling is not milling the 3D content, but the complete workpiece in one
this is what I made as test in Fusion:
the result is that my name is also milled on -4mm like the space between the letters.
Only the frame is milled like on the model.