you have a bug, just playing now and the text change's size using the height command.
post this on the fusion forum with a screen cast and a copy of the file
Hi all,
I'm am trying to use fusion to engrave some small text, but am having trouble setting the height of the text.
I am using the text command under the sketch menu to add text to a model surface. One of the options it gives is text height, but it seems to set the height of a dashed line box that the typed text appears in. I don't see a way to set the height of the actual text characters. When I use inspect to check the text, the height of the box is exactly the height set in the dialog box for the text.
I must be missing something, but so far I'm stumped, any advise would be most appreciated.
Terry
Similar Threads:
you have a bug, just playing now and the text change's size using the height command.
post this on the fusion forum with a screen cast and a copy of the file
<img src="https://ivxo1q-dm2305.files.1drv.com/y4mENMmTr_Cabc7pR0FUdB6gtbADq2JbuG4_rGy0eBQvLJx19pTi6TqMUIJN0xgOyDIc0gWoxYhS38HpbSTFGdfaK-o42IOU6jczrhDpfpCOTNGL1X6hvZCbgj0y35gqmq1YGTrWwShYGV-C7lXA2esy0Pi_WfnBSyroDLSGXwce4uSr1U7op7srdi78rispHCa_K4aFlTlJPVkkNWMfgh_Tg?width=60&height=60&cropmode=none" width="60" height="60" />
Being Disabled is OK CNC is For fuN
Thanks for the reply, I posted the file to the fusion forum, hope someone can figure it out for me.
Terry
Got an answer from the fusion folks on their forum, there is something of an issue, and they are working it, also provided some tips for a work around that will work for me.
Terry
Solved: Re: Text Height issue - Autodesk Community