Change Dimension in F360
In my sketch I made the workpiece thickness 0.375". I need to increase it to 0.750". How can this be done? I tried F360s online help, but found no help. I've tried "push/pull" without success. I know I'm doing something wrong.
Similar Threads:
- Change dimension automatically
- Need Help!- V23 Dimension Help
- Problem- dimension 200
- Need Help!- Need to know this dimension of DMU 50e
- Snap on Dimension
Re: Change Dimension in F360
You usually create thickness with push/pull, not in the sketch? If you have a dimension in your sketch that shows 0.375", then double click on the number and change it to 0.75.
If that doesn't work, then I don't understand what you're doing. Pics would help.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: Change Dimension in F360
Have you checked the Autodesk forum recently? There was a post last night clarifying the difference between push/pull and extrude in both model space and sketch with a screencast.
Reply with Quote
