Need Help! F360 - Tormach PCNC 1100 Post Issue on Drilling


Results 1 to 3 of 3

Thread: F360 - Tormach PCNC 1100 Post Issue on Drilling

  1. #1
    Member
    Join Date
    Oct 2010
    Location
    USA
    Posts
    670
    Downloads
    0
    Uploads
    0

    Default F360 - Tormach PCNC 1100 Post Issue on Drilling

    Under the drilling tab in F360 CAM - I'm setting my drill to peck at .020" with accumulated full retract at .25". However, the post to Tormach does not force the retract. Keeps on plugging away at .02" pecks though the part. Code below that posted.

    Using the 8/16/2017 post for Tormach

    Chip Breaking - partial retract

    %
    (Drill Test)
    (T72 D=0.3125 CR=0. TAPER=135deg - ZMIN=0. - drill)
    N10 G90 G54 G64 G50 G17 G40 G80 G94 G91.1 G49
    N20 G20 (Inch)
    N30 G30

    (Drill4)
    N50 G30
    N60 T72 G43 H72 M6
    (.3125 Screw Drill)
    N70 S1500 M3 M8
    N80 G54
    N90 G0 X0. Y0.
    N100 G0 Z1.35
    N120 G0 Z0.95
    N130 G98 G73 X0. Y0. Z0. R0.95 Q0.02 F8.
    N140 G80
    N150 G0 Z1.35
    N170 M5 M9

    N180 G30
    N190 M30
    %

    Similar Threads:
    Awall - The Body Armor Dude
    CoolCNCStuff_ on Instagram - CoolCNCStuff.com


  2. #2
    Registered
    Join Date
    Jun 2016
    Location
    United Kingdom
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default Re: F360 - Tormach PCNC 1100 Post Issue on Drilling

    This happened to me a while ago..... if memory serves me well I resolved it by turning on Dwell before retract and changing it to 0.1 seconds.

    G


    Sent from my iPhone using Tapatalk



  3. #3
    Member
    Join Date
    Oct 2010
    Location
    USA
    Posts
    670
    Downloads
    0
    Uploads
    0

    Default Re: F360 - Tormach PCNC 1100 Post Issue on Drilling

    [QUOTE=GBru;2086614]This happened to me a while ago..... if memory serves me well I resolved it by turning on Dwell before retract and changing it to 0.1 seconds.

    G


    Sent from my iPhone using Tapatalk[/QUOTE]

    Sweet!!!! Looks like that fixed it. Thanks for the help.

    Awall - The Body Armor Dude
    CoolCNCStuff_ on Instagram - CoolCNCStuff.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

F360 - Tormach PCNC 1100 Post Issue on Drilling

F360 - Tormach PCNC 1100 Post Issue on Drilling