ask on the forum you will need a custom post
I have just started using Fusion360 my question is, Is there is a Fusion360 postprocessor for Mach3 Plasma?
I'm trying to use the Waterjet/Laser/Plasma Contour in CAM but when I try to post process using the generic Mach3Mill I get this error.
"Error: Waterjet, laser, and plasma cutting toolpath is not supported by the post configuration."
Similar Threads:
ask on the forum you will need a custom post
<img src="https://ivxo1q-dm2305.files.1drv.com/y4mENMmTr_Cabc7pR0FUdB6gtbADq2JbuG4_rGy0eBQvLJx19pTi6TqMUIJN0xgOyDIc0gWoxYhS38HpbSTFGdfaK-o42IOU6jczrhDpfpCOTNGL1X6hvZCbgj0y35gqmq1YGTrWwShYGV-C7lXA2esy0Pi_WfnBSyroDLSGXwce4uSr1U7op7srdi78rispHCa_K4aFlTlJPVkkNWMfgh_Tg?width=60&height=60&cropmode=none" width="60" height="60" />
Being Disabled is OK CNC is For fuN