G-Code weird thing.

[NeoTech]

So i'm working on a camprocessor that i'm converting from Siemens 810D to the old Siemens 810M for fusion360

And i got this line out of the process:
N3077 G3 X72.117 Y-76.782 Z-24.6 I1=72.127 J1=-76.666 K1=-24.883

And when run thru NCPlit i get illegal characters warning on that one.
Im not sure if you can write radii like that..

Kind regards // Andreas

Similar Threads:

• Problem- Weird g-code / cnc behaviour
• Problem- weird code when using predator
• what is this thing?
• Weird thing happened with my Viper 200
• What is this thing? And what 'exactly' does it do?

[steryd]

You cannot define arc with three coordinates.
First You have to define workplane (G17 or 18 or 19) an then You define arc with two coordinates.

[Maroslav4]

[QUOTE=steryd;1857078]You cannot define arc with three coordinates.
First You have to define workplane (G17 or 18 or 19) an then You define arc with two coordinates.[/QUOTE]

That is not true. You CAN define circular interpolation with XZYIJK (for eample helix machining is define with 3 point, because machine go down with 3 axis). Problem is with anything else.

Marek