Run the Gcode thru a G-code visualizer CAMotics
So I ran my first program today in metal, ran a few in wax and all went fine.
At the end of a contour 2d tool path, my end mill plunged through my aluminum and into my vice, destroying an expensive end mill, and ruining my vice jaw.
Looking at the code that did it, I don't quite understand why.
I am running Mach3, so I used the generic Mach3 post in Fusion 360.
Can anyone help me understand what happened? It happened somewhere between the last 2 or 3 lines of this code below. Any help would be greatly appreciated! I looked up the codes and its not clear to me why this happened.
Code:(2D CONTOUR1) M5 M9 M1 T31 M6 S2300 M3 G54 M8 G0 X1.5675 Y0.2935 G43 Z0.6 H31 Z0.2 G1 Z0.0394 F5. Z-1.6729 F4. G19 G2 Y0.2435 Z-1.7229 J-0.05 K0. G1 Y0.1935 F5. G17 G3 X1.6175 Y0.1435 I0.05 J0. G1 X3.1136 F9. G2 X3.3636 Y-0.1065 I0. J-0.25 G1 Y-3.4135 G2 X3.1136 Y-3.6635 I-0.25 J0. G1 X0.1214 G2 X-0.1286 Y-3.4135 I0. J0.25 G1 Y-0.1065 G2 X0.1214 Y0.1435 I0.25 J0. G1 X1.6175 G3 X1.6675 Y0.1935 I0. J0.05 F5. G1 Y0.2435 G19 G3 Y0.2935 Z-1.6729 J0. K0.05 G0 Z0.6 G17 G28 G91 Z0. G90
Similar Threads:
Run the Gcode thru a G-code visualizer CAMotics
Been doing this too long
G28 G91 Z0.
What location is stored for the G28 parameter?
You can home in places, what just means park the machine somewhere where it wont crash with the Z at the top of it's travel and hit the home button, problem solved
<img src="https://ivxo1q-dm2305.files.1drv.com/y4mENMmTr_Cabc7pR0FUdB6gtbADq2JbuG4_rGy0eBQvLJx19pTi6TqMUIJN0xgOyDIc0gWoxYhS38HpbSTFGdfaK-o42IOU6jczrhDpfpCOTNGL1X6hvZCbgj0y35gqmq1YGTrWwShYGV-C7lXA2esy0Pi_WfnBSyroDLSGXwce4uSr1U7op7srdi78rispHCa_K4aFlTlJPVkkNWMfgh_Tg?width=60&height=60&cropmode=none" width="60" height="60" />
Being Disabled is OK CNC is For fuN