Fusion 360/Haas freezing


Results 1 to 4 of 4

Thread: Fusion 360/Haas freezing

  1. #1
    Registered
    Join Date
    Feb 2017
    Location
    United Kingdom
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Fusion 360/Haas freezing

    Hi,

    I have used my newly installed haas just fine for adaptive clearing, but trying to run contour 2d toolpaths seems to mess with it...

    I have noticed this repeatable issue, my axis all stop moving, the code line doesn't progress, but the DRO still continues to count as if the axis are moving in Z.

    The toolpath came out of fusion 360, and it freezes on either line 75, or won't move onto line 80, so I'm not sure what is wrong?

    here is the G code excerpt, I am using the haas generic post processor, and the machine is TM1

    Any advice is very welcome about where I have gone wrong

    %
    O00006
    (hole centre as g54)
    (T1 D=10. CR=0. - ZMIN=-5. - flat end mill)
    N10 G90 G94 G17
    N15 G21
    N20 G53 G0 Z0.

    (2D Contour7)
    N30 T1 M6
    N35 S4000 M3
    N40 G54
    N55 G0 X-27.5 Y27.35
    N60 G43 Z21. H1
    N65 G0 Z11.
    N70 G1 Z7. F690.
    N75 Z-4. F3.9
    N80 G19 G2 Y26.35 Z-5. J-1. K0.

    Thanks folks

    Similar Threads:


  2. #2
    Registered
    Join Date
    Feb 2017
    Location
    United Kingdom
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Re: Fusion 360/Haas freezing

    Another forum kindly showed me the error of my ways, the issue is the plunge feed rate - it's not frozen... what an idiot



  3. #3
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Fusion 360/Haas freezing

    Dangle_kt

    %
    O00006
    (hole centre as g54)
    (T1 D=10. CR=0. - ZMIN=-5. - flat end mill)
    N10 G90 G94 G17
    N15 G21
    N20 G53 G0 Z0.

    (2D Contour7)
    N30 T1 M6
    N35 S4000 M3
    N40 G54
    N55 G0 X-27.5 Y27.35
    N60 G43 Z21. H1
    N65 G0 Z11.
    N70 G1 Z7. F690.
    N75 Z-4. F3.9
    N80 G19 G2 Y26.35 Z-5. J-1. K0.

    The layout/format of the program is not suitable to run on a Haas control

    This line is incorrect, for any control N20 G53 G0 Z0. If you need to do this for some unknown reason, only use it like this G0Z0. a G53 does not belong in this line

    Check this Feed move it may need a ( F3.9. ) a dot at the end, Feed moves normally need a dot/period at the end

    With a Haas control the T1M6 command takes the tool to Z0, Z0 is Tool Change Position

    Get to know your control, the Haas manual has lots of examples of how your program should look, if you are not sure about something like this, they also have some great videos that they have been doing

    Mactec54


  4. #4
    Member
    Join Date
    Nov 2012
    Location
    Canada
    Posts
    145
    Downloads
    0
    Uploads
    0

    Default Re: Fusion 360/Haas freezing

    Is your Haas a new generation? Autodesk has two new generation processors with and without the ability to insert pic's and video but you have to enter Haas mill into the fields to bring these up.


    https://knowledge.autodesk.com/suppo...usion-360.html



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fusion 360/Haas freezing

Fusion 360/Haas freezing