Gecko G540 4-axis Stepper Controller Kit and Schematic

[phomann]

HI,

I have put together a Kit of the core parts to build a CNC controller based on the Gecko G540 4-Axis Drive. I've also done the wiring schematic for controller.

The Schematic should be a help to those wanting to to put their own controller together, whether you use the kit, or your own parts. If you have any suggestions for what else should be in the kit, let me know.

The schematic can be found towards the bottom right of the following page.

http://homanndesigns.com/store/index...products_id=90


Cheers,

Peter.

[Al_The_Man]

Shows 'Link not Found'?
Al.

[will gilmore]

http://homanndesigns.com/store/index...products_id=90

[phomann]

Hi Al,

I've fixed the link. Sorry about that.

Cheers,

Peter.