My First Purchase

[AuS MaDDoG]

Hi All,

Thought I would post a couple of pics as too where the machine is at!! been a while since last update!









still got a fair amount of work too go, but starting to get there now

Cheers
Tony.

[craigjh]

Fantastic job guys! Looking really professional.

[AuS MaDDoG]

Hi All,

And thanks for the encouragement, thouroughly enjoying the build. Todays progress was the installation of all the racks for the X & Y axis's I also installed all the motors and the idler arm. Assembly is now complete and its now time to get on with the electrics/electronics.













Cheers
Tony.

[AuS MaDDoG]

Hey all,

Been a while since I have been on here, and thought I would have a poke around and see whats going on. Also trying to source info regarding options for an Indexer/4th axis to put onto my machine.

If anybody out there has the time and can assist me in putting some good options forward and or are able to help me get this together I would be more than happy to hear from you. I am located in Shailer Park just South of Brisbane.

Is the Brisbane Cnc group still going ?? I attended I think it was the 3rd meeting then with the build starting and change of work commitments I kind of lost track. Be good to catch up again.

Cheers
Tony.