Where to buy CNC motors in Sydney?

[suerama]

Hi,
Can someone tell me where I can buy a cheap CNC motor kit in Sydney?

I'm looking for motors, drivers and power supplies.

Thanks
Al

[tumutbound]

Hi Al,

You wont be able to find cheap stepper motors locally unless you're looking at small ones.
Check out eBay, there is a locally supplier who often sells there. Not really cheap though.
Here is an Oz forum that may help with finding suppliers used by local hobbyists.

[rjfurness@bigpo]

Hi Al,
I just recently bought the Hobby CNC 4 Axis kit. Price wise as a complete unit it was competitive to anything I thought I could find. The clincher for me was it is all designed to work together, and there is a lot of support out there from other users and the vendor. I really couldn't go wrong I felt.

The kit, arrived with motors in about 6 days from the US to country NSW. I have a build thread here on my machine.

http://www.cnczone.com/forums/showthread.php?t=72632

I have not finished the board and successfully test run it yet, but that should occur in the next 2 days or so.

Hope this helps.

Jason

[cp8071]

Try here: http://www.automationdirect.com.au/

[rjfurness@bigpo]

Hi Al,
I tested my board and it works correctly, building it up is quite easy if you want to go this way.

Jason