Any South Australians here?

[Matty Zee]

Hi everyone,

Just wondering if there are any South Australian active members?

I'm from Adelaide and will hopefully start building my router soon. Nearly finished my design and need to finalise the design as quick as possible as i'm probably heading off to the US for work next week and plan make the most of it and get a heap of gear shipped to my hotel while i'm there. Hopefully i'll save a fair bit on postage.

[Geoff63]

I'am from south ozzie
Live down port Augusta way.
I'am still gathering parts to build my first cnc machine.

[Matty Zee]

Hi Geoff,

What kind of machine are you building? What kind of linear rails and screws are you planning on using?


Matt

[kowell]

Hi Geoff,

So im am not the only South Aussie here,

Bugger?

Live up in the Riverland.

Kym

[Davidt]

Hi
I live in the southern suburbs of Adelaide. Just receive the plans from Davd Steele and are hoping to start construction in the next few weeks.
David

[justtemprament]

I'm also down South - Aberfoyle Park. I've been gathering
stuff for a while now - got an X1 mill and a BV20-L lathe
along with a S/H ballscrew, handfull of Geckos, one of Jon
Elson's controller boards, a Shumatech DRO and some H&F
scales... My day job means I just don't get out to the
workshop often enough unfortunately but I'm trying to get
inspired...

[landart1]

Hello everyone.
I am from Port Elliot and just discovered this amazing place.
I have been looking at Roland EGX'S BUT OUT OF MY PRICE RANGE.
I plan on using the concept for Ceramic design.
How expesive are the electronics and software.
I use Corel Draw quite a lot.
Where do you get the "avionics" from in Australia.????????
Any info from those down the track from me would be much appreciated.
cheers Glenn

[Geoff63]

MATTY
It is good to find other people with the same interests.
I am planing on making my router with a open base
using 20mm rails and ball screws it will be 1200x800 aprrox

[spoolin_20b]

hello sotheners

im from adelaide (woodcroft) to i plan to buld a rockcliff CNC

[Kenre]

Looks like theres a few of us in here. Ive been looking for a while, never posted till now! Im in the Northers burbs. I have 2 unknown stepper motors (had about 3 years) that should go onto a lathe, or with a 3rd a Mill. Just never had the time to do it!

Ken

[Matty Zee]

What northern suburb? I'm from Redwood Park.... more northeast.
I just got back from the US where i bought my 3 steppers, gecko drives and ballscrews. Now i just need to work out what linear rails i'm going to use and get started...

[Kenre]

Im in Salisbury!

Anyone here know about stepper motors?

I have 2 Fuji's 6 wire, 1.8V 4.8A per phase. 3/8 shaft.

Any ideas on what sort of torque they could be?


Ken