Router Bits In Australia

[epineh]

I know this is probably one of the most asked questions after power supplies, but I am looking for bits for my (soon to be finished) router. Most of what I find are kits that have one bit that I want and 20 others that I won't ever use.

I would like to purchase slot drills, ballnose endmills etc all with 6mm shanks, varying sizes from about 2mm to 6mm dia.

Any assistance appreciated.

Almost forgot, Australian suppliers preferred.

Russell.

[Syil_Australia]

Russell...

I assume you are wanting to cut Metal.

You can purchase individual cutters from:

www.mcjing.com.au
www.minitech.com.au

Both good companies to deal with.


cheers

Originally Posted by epineh I know this is probably one of the most asked questions after power supplies, but I am looking for bits for my (soon to be finished) router. Most of what I find are kits that have one bit that I want and 20 others that I won't ever use. I would like to purchase slot drills, ballnose endmills etc all with 6mm shanks, varying sizes from about 2mm to 6mm dia. Any assistance appreciated. Almost forgot, Australian suppliers preferred. Russell.

[epineh]

Should have mentioned I wanted woodworking bits...the mcjing site has pretty much what I was after, cheers.

Russell.

[andy_ck87028]

Many tradies use carb-i-tool. Its what you you'll find in Bunnings.

http://www.carbitool.com.au/products.htm

Andy

[epineh]

Thanks for the link Andy, downloaded the catalogue, lots of things to tell Santa about...

Cheers.

Russell.