Help required in Brisbane

[mfisher]

This is my first post .
I recently acquired a JCut6090.
Came with Artcam and CNC Studio. I can't help thining there must be a better software package available....more intuitive...

Being totally unfamiliar with both sw packages and the machine, I am hoping someone might be willing to offer me some 'start-up' help.

I would think that a few hours would do the job. I can manually operate the 6090 with Jog controls, but even a simple circle seems to be giving all sorts of grief with Origins. I'm sick of looking fro the dumb mistake I am making!

Happy to pay for your time, either in beer, or barter.

Cheers
Mark

[rocabig]

Try these guys out
http://www.vectric.com/
I have aspire and have never had a problem
it is easy to use
there is a forum on it too with lots of helpfull people
you can try the free trial to see if it is ok for you

Richard

[omnicnc]

ArtCAM and Toolpaths This is the ARTCAM manual. And for NC studio software, you can get it from the seller. We are OMNI CNC Router supplier.