NEWBIE LOOKING FOR A CNC/MILL CAN YOU HELP?

[MR AVANTI]

Hello Cnc People !

Hope all is well.

Just hoping you guys with all that CNC experience can help steer me in the right direction with a CNC/MILL that can help me produce the following.

1) 5mm to 10mm thick wording like you would see on car badges up to 100mm wide x 40-50mm high.With a 3dimenensional look.Cut out of acrylic or pvc.

2) 10mm thick routed letters from acrylic and mdf for signage ,flat up to 100mm high .

I dont have the space for a full size router table or the budget. I was hoping someone could recommend a model that can do the above .A machine that can take maybe a 300mm wide but a 1m length or shorter sheet of acrylic or pvc,aluminum or timber?

what would be my options ?? i need a machine that could be an all rounder and be accurate and good cut speed at low budget.I've seen some on ebay but they all seem have very small deck.

Also does the software come with these machines or they are extra cost?
I'm am a newbie in this field so sorry to ask silly questions.

Any help would great,

Cheers,
Mr AVANTI

[jonmilligan]

Hi, Due to ill health,I have an Australian Multicam Designer for sale with all software packages(3d, Vcarve, photocarve and signlab es) it will cut all you require and more! 1200mm x 1200mm table. I am in country Nth east Victoria but can ship it anywhere in Oz.
Cheers
John Milligan

[MR AVANTI]

Hello John,

Sorry to hear about your health..
Would be interested in knowing more about the machine and how much you want for it.

Would appreciate if you can Send details to pjay32@optusnet.com.au

await your reply.

Cheers,

Mr Avanti.

Hi, Due to ill health,I have an Australian Multicam Designer for sale with all software packages(3d, Vcarve, photocarve and signlab es) it will cut all you require and more! 1200mm x 1200mm table. I am in country Nth east Victoria but can ship it anywhere in Oz.
Cheers
John Milligan

[rbarnold]

Have a look at Carbatec they are in most Australian cities.
They have machines at around $5,000 to $6,000 that come with everything you need plus the backup if you need it.

CARBA-TEC - Woodworking Tools and Woodworking Machines

Other than that there are many kits available at lower cost if you want to put your own together

hope this helps
Roger

[kiwichris]

There's a few Chinese table-top style machines on ebay that will cut 600x900 which is close... Search for cnc 6090 on there...

I've not bought one, and can't recommend a vendor so do some research of your own before buying..

[kiwichris]

Sorry, make that 'cnc 9060' on ebay, close. :-)