Fellow Hobbyist in SE Qld

[boana]

Hi Guys,

Was wondering if there are any hobbyists in the SE Qld area around Browns Plains to the Jimboomba area? That may have a CNC Router or CNC Mill that might be willing to assist me with cutting some parts for a CNC Lathe Mill project I am working on.

Looking forward to hearing from you.

[auzzie53]

Hi Mate,
I am at Kallangur, just going through the process of converting both a x2 Mill and a C2 Lathe to CNC

Cheers
John

[boana]

Hi John,

Good to hear from you.

Apart from a mate of mine in Stafford on the North Side (not cnc just lathe), there doesn't seem to be very many in this cnc/hobby?

Have you just started or have you been collecting parts and components for a while learning as you go like me.

I've been slowly accumulating for over a year.

[Chrisjh]

Hi,

I am at Algester near Browns Plains and can help if you wish.

PM me.

Regards

Chrisjh

[EricBear]

Hi Guys,

Was wondering if there are any hobbyists in the SE Qld area around Browns Plains to the Jimboomba area? That may have a CNC Router or CNC Mill that might be willing to assist me with cutting some parts for a CNC Lathe Mill project I am working on.

Looking forward to hearing from you.

Hi boana, Just read your message I have a AL-320G 320 x 600mm BENCH LATHE
and a HM-46 GEARED HEAD MILL DRILLING MACHINE
which I am also looking at cnc control wondering how you are going with your mad to cnc.

Eric

[boana]

Hi boana, Just read your message I have a AL-320G 320 x 600mm BENCH LATHE
and a HM-46 GEARED HEAD MILL DRILLING MACHINE
which I am also looking at cnc control wondering how you are going with your mad to cnc.

Eric

That HM-46 CNC'd is what I would like to have as my Mill when I can afford it.

I've been drawing up various parts that I need to make to be able to CNC the various axis. One good thing about taking my time is that I get time (lots) to think about the best way to accomplish what I would like to achieve with my particular lathe, some pictures in this thread here

From where do you hail, Eric?

[boana]

Hi,
I am at Algester near Browns Plains and can help if you wish.
PM me.
Regards
Chrisjh

I sent you a PM wondering if you got it?
Regards

[EricBear]

That HM-46 CNC'd is what I would like to have as my Mill when I can afford it.

I've been drawing up various parts that I need to make to be able to CNC the various axis. One good thing about taking my time is that I get time (lots) to think about the best way to accomplish what I would like to achieve with my particular lathe, some pictures in this thread here

From where do you hail, Eric?

Hi Boana,
Im based down in Loganholme my place backs on to the Logan river.

[boana]

Hi Boana,
Im based down in Loganholme my place backs on to the Logan river.

Well I am at Jimboomba so we are not to far from each other.

What do you use your mill and lathe for? Apart from the obvious.

[Chrisjh]

I sent you a PM wondering if you got it?
Regards

Hi,

Sorry about not replying sooner. I changed email addresses earlier this year and totally forgot to update the details on cnczone. I've fixed the email details this morning so shouldn't be a problem in the future.

I replied via PM last night. I'm still keen to help anyone who is interested in CNC machines.

Regards

Chrisjh

[sparkiebbs]

Gday guys New to cnczone about half an hour before this post always reading threads here for info which has always helped me out I have two cnc machines in Maleny Just upgraded to a 400 x 400 from a 210 x 175 always looking for information and helping out fellow cnc folk with info i have obtained.

Cheers
Mark

[cncholic]

Hi Boana,

I am down at the Southern Gold Coast and have a Syil X6 and a Sieg KX4. Also have a couple routers up to 10'. And a good size manual lathe with 38mm center. If the distance is not too great for you you are welcome to cut what you need.
Just PM me.