Hi folks, I'm a new kid on the block. I have some questions that require answers. First I have to work out how this program works. Might take time. I've built a roll forming machine to turn out thin steel chanel, 25mmx55mm. Now I need to build another machine to bend my chanel edgeways at a 90 degree turn. These machines are on the market, although I've never seen one. The price is prohibitive. I know the basics with relation to the bending die,clamp die, wiper die, and pressure die, and probably could fumble through with time. I'm short on time and would like to get it right first go. Have I got anyones attention? Bye for now, Colin. ( PS. I'm thinking of pictures and drawings, not merely explanations.)