LinkBack URL
About LinkBacks
Try Action Aluminium Brisbane,pretty sure they have it.Good service & prices.Phone 07 3274 2722.Hope this helps
| | |
Hi
Does anybody know where I can get some
6061T6 not 6060T5
10mm thick, can not be thinner
50mm preferably 75mm wide
flat bar
Performance metals Australia does sell some buts its expensive
I've tried several aluminium wholesalers and they can only provide 6060T5
Try Action Aluminium Brisbane,pretty sure they have it.Good service & prices.Phone 07 3274 2722.Hope this helps
They do not seem to have this according to their website
I've sent an email, shall call tomorrow
I have a 20' length of .5", I'd send you a private message but for some reason it's not working. Is everyone elses pm's not working?
I am in Australia so unless delivery is like $50 Im not interested
How long of piece do you need?
how wide is the piece you got?
several meters
I mean $50 for the entire 20' length it can be cut down to smaller pieces
You said you need 10mm thick can't do that because here in the U.S.A. it's a pain to get material in mm. I don't even know if you can I've never tried and never will. So closest to that of what we have is a .5" thick x 3.0" wide x 20' long. So how much length do you need? To ship 11' of .5"x3.0" cut up into smaller lengths would be $33.00 + $167.00 for the material.
Last edited by universalfab; 08-31-2010 at 12:33 AM.
.5" is ok 3" wide is there any 2.5" wide?
how much for all 20' cut up into 5feet lengths
delivered to melbourne australia?
I'll let you know tommorow, I'd have to call the post office to get info on shipping lengths like that. Yeah we have 2.5" too. So what's going on in australia these days, I'm seeing more and more stuff going on over there?Originally Posted by chris123
Do you a parts list with prices I can see?
1.5in would also be useful and might be better suited
The lengths can be 8" long but is it worth it cutting them up that small
We recently had an election with no clean majority winner
Posting Permissions
| | |
