Bump -- Anybody?
Hi all you precision CNCers. Must be precise for linear rails to bolt on.
Melbourne area.
CNC job need accurate drilling 236 holes, 42 x M5, 59 x M8 in 5mm x 50mm STEEL 2500 long. 4 pieces.
Aluminum: 100 x 100 x 6 angle 2500 long, 4 pieces, simple setup. one pass milling, 84 6mm semicircular (half screw) notches and 59 8mm holes
Programs to suit your machine and drawings supplied.
email: meckelec@y7mail.com (PM bin not practical)
Thanks
Neil
Similar Threads:
Last edited by neilw20; 02-09-2013 at 06:59 AM. Reason: typo
Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. THREE ways to fix things: The RIGHT way, the OTHER way, and maybe YOUR way, which is possibly a FASTER WRONG WAY!
Answered my own question. I found someone with 3050mm capable VMC and eyballed it.
Not so many larger machines around, I found. Kept hitting the wall at 2000mm
Thanks for reading. All done here.
Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. THREE ways to fix things: The RIGHT way, the OTHER way, and maybe YOUR way, which is possibly a FASTER WRONG WAY!