- Australia got a dusty FLA100 that needs a new home and some work Brisbane
-
Registered
got a dusty FLA100 that needs a new home and some work Brisbane
Hi,
I purchased this 5 years ago, and assembled it. It has been sitting in storage for a couple of years. Apart from testing it has seen no use whatsoever.
This kit needs some work as you can see some of the steel bars have some surface rust, so a partial breakdown will be required.
Comes with the following extras.
2.2KW Chinese Watercooled spindle (was sold to me as having german bearings)
2 New collet sets (1 pictured)
9 new end mill cutters of various sizes
Hitachi 2.2KW 1phase to 3phase VFD
5 x Rockler Woodworking anodised track for Dogs and hold down clamps.
6 x hold down clamps from rockler
7 Meters of very high quality 3 phase double shielded cable for spindle to VFD
Photosensor kit for limit switches from CNC4PC
1 x Double potentiometer to interface POKEYS from CNC4PC
1 x PCI Parrallel port
1 x PCI Express Parrallel port
2 x CNC4PC analogue IN and OUT boards
1 CNC4PC Relay board with 12 relays
1 x Pulser hand controller with emergengy stop button and jog dial
1 x replacement jog dial for Pulser
1 x Geckodrive G540 stepper driver
1 x spare NEMA32 motor
More than enough tractor track to do all wiring management
1 x POKEYS 55
Full watercooling kit with 2 high flow pumps with ceramic impeller,
resovoir
Large Radiator
All tubes and connectors needed to make a closed loop watercooling system for the spindle.
As you can see its all here. Any questions please ask. Offers welcome would like 2K AUD
Similar Threads:
-
-
Registered
Re: got a dusty FLA100 that needs a new home and some work Brisbane
-
Registered
Re: got a dusty FLA100 that needs a new home and some work Brisbane
-
Registered
Re: got a dusty FLA100 that needs a new home and some work Brisbane
I'm in Melbourne.
Can you work out what shipping would be.
Maybe next to dismantle a little to get it a bit smaller
Sent from my SM-G930F using Tapatalk
-
Registered
Re: got a dusty FLA100 that needs a new home and some work Brisbane
Also do you have any pics
Sent from my SM-G930F using Tapatalk
-
Registered
Re: got a dusty FLA100 that needs a new home and some work Brisbane
Is it still available and what size is it? thank you Brian.
- Australia got a dusty FLA100 that needs a new home and some work Brisbane
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules