Australia Extron E320 CNC mill communications. - Page 2


Page 2 of 2 FirstFirst 12
Results 13 to 24 of 24

Thread: Extron E320 CNC mill communications.

  1. #13
    Registered
    Join Date
    Feb 2007
    Location
    Australia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    Peter35 - I would certainly be interested in the manual. Do you mind emailing it to me abanco@bigpond.net.au



  2. #14
    Registered
    Join Date
    Sep 2013
    Location
    Australia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    Will email tomorrow when l get into work.
    Peter



  3. #15
    Registered
    Join Date
    Feb 2007
    Location
    Australia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    Appreciate it Peter, thank you
    Ariel



  4. #16
    Registered
    Join Date
    Sep 2013
    Location
    Australia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    I am after a post processor for the Mirl, would anyone have one they could email me.
    I have a mastercam post however it is for version 9 not Mastercam X. I am also running hsmworks and fusion 360.
    I am also looking at the centroid retrofit, has anyone had experience with these.



  5. #17
    Registered
    Join Date
    Jul 2010
    Location
    Australia
    Posts
    96
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    Quote Originally Posted by proengines View Post
    The stocks are aluminium, I do have plans to make myself a couple of nice timber ones at some stage though. I make a few different styles but couldn't keep up with demand with the Tormach.
    Hhmmm. I wonder are you a registered gunsmith with a valid licence? My understanding is making any "functional" part of any gun (including paintball) in this country is illegal?



  6. #18
    Registered Aly-Tek's Avatar
    Join Date
    Jul 2016
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    Quote Originally Posted by Peter35 View Post
    I am after a post processor for the Mirl, would anyone have one they could email me.
    I have a mastercam post however it is for version 9 not Mastercam X. I am also running hsmworks and fusion 360.
    I am also looking at the centroid retrofit, has anyone had experience with these.
    Hi Peter, I have a post that I am using for Fusion360, happy to email it through. In return can I get a copy of the Mastercam post? I have a friend with Mirl software and Is trying to run Matercam atm.
    Cheers Stephen,



  7. #19
    Registered Aly-Tek's Avatar
    Join Date
    Jul 2016
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    Quote Originally Posted by FastFarmer View Post
    Hhmmm. I wonder are you a registered gunsmith with a valid licence? My understanding is making any "functional" part of any gun (including paintball) in this country is illegal?
    I believe the Stock is fine.



  8. #20
    Registered
    Join Date
    Sep 2013
    Location
    Australia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    Quote Originally Posted by Aly-Tek View Post
    Hi Peter, I have a post that I am using for Fusion360, happy to email it through. In return can I get a copy of the Mastercam post? I have a friend with Mirl software and Is trying to run Matercam atm.
    Cheers Stephen,
    G'day Steve
    Can you give me an email address, am not able to upload pst files.
    my email is peterdamage@gmail.com



  9. #21
    Registered
    Join Date
    Aug 2007
    Location
    Australia
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    I forgot to check back recently, I'm glad there's been some other people post here. I have a Fusion 360 post and a Mastercam one which are very close if not spot on. I've been using sheetcam as most of my work is 2.5D and it's quick and simple from a DXF so I have a post for that as well if anyone needs it.

    Does anyone have DNC set up on their machines? A lot of the F360 code for the 3D work I've been doing goes over the line limit of the control so it might be time to get that sorted out.

    FastFarmer, no legal issues making the stocks. They're not a firearm part as per the definitions in the legislation.



  10. #22
    Registered
    Join Date
    Jul 2009
    Location
    Australia
    Posts
    80
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    Quote Originally Posted by proengines View Post
    I forgot to check back recently, I'm glad there's been some other people post here. I have a Fusion 360 post and a Mastercam one which are very close if not spot on. I've been using sheetcam as most of my work is 2.5D and it's quick and simple from a DXF so I have a post for that as well if anyone needs it.

    Does anyone have DNC set up on their machines? A lot of the F360 code for the 3D work I've been doing goes over the line limit of the control so it might be time to get that sorted out.

    FastFarmer, no legal issues making the stocks. They're not a firearm part as per the definitions in the legislation.


    I have DNC on my machine, I will have to check what software I used, I also now have a "Shoplink Flash" it works better than the DNC with it I just plug in a USB and run from it.



  11. #23
    Registered Aly-Tek's Avatar
    Join Date
    Jul 2016
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    Quote Originally Posted by Rick_B View Post
    I have DNC on my machine, I will have to check what software I used, I also now have a "Shoplink Flash" it works better than the DNC with it I just plug in a USB and run from it.

    OOOH, I have DNC working but would be interested in the "Shoplink Flash"

    @Proengines, I have a F360 post but and finding when I tap a thread it seems to come up with an error but when I fix that issue I get an error with feedrate. I can't remember what I have done in the past to work it out but need to fix it again now as I've upgraded my computer and my originally set up post isn't there anymore



  12. #24
    Registered
    Join Date
    Jul 2009
    Location
    Australia
    Posts
    80
    Downloads
    0
    Uploads
    0

    Default Re: Extron E320 CNC mill communications.

    Quote Originally Posted by Aly-Tek View Post
    OOOH, I have DNC working but would be interested in the "Shoplink Flash"

    @Proengines, I have a F360 post but and finding when I tap a thread it seems to come up with an error but when I fix that issue I get an error with feedrate. I can't remember what I have done in the past to work it out but need to fix it again now as I've upgraded my computer and my originally set up post isn't there anymore
    USB reader for CNC's, HAAS-FANUC-for most CNCs, connect to RS232, ShopLink FLASH | eBay



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Extron E320 CNC mill communications.
Extron E320 CNC mill communications.