Looks like they used a different post processor. What's the beginning of each file look like?
Hi,
i bought used CNC router with XZA axis. I am trying to make program with Vectric 8.5 for it but when i save .nc program i got A axis rotates in same position many times till A360 and then after X Z movement it rotates back till 0 it takes about 1min in each A axis position to rotate and it rotates about 50 times. When i bought cnc router i got some programs with it and there bigest A axis coordinate is A6.7.. when i change A coordinates manually in vectric programs it works good but it takes time every time to change it manually. Could somebody help me to solve this problem? How to make vectric generate correct program?
Similar Threads:
Looks like they used a different post processor. What's the beginning of each file look like?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)