Aspire poor stl quality


Results 1 to 4 of 4

Thread: Aspire poor stl quality

  1. #1
    Registered
    Join Date
    Aug 2014
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Aspire poor stl quality

    Hello,
    I import a stl file but the quality is very low. If I cut and import a piece from the stl file it gets better quality. 140 cm x 60 cm stl file on the right. 30 x 30 cm on the left. Why is this happening?




    Thank you

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Aspire poor stl quality-20247969_10214074993927791_8608447719613759377_o-jpg  


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Aspire poor stl quality

    Because Aspire has a fixed, limited resolution, the larger the model is, the poorer the resolution will be.
    Make sure you use the highest resolution, by holding the Shift key when you start a new job, which gives you two higher resolution options.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Aug 2014
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Aspire poor stl quality

    I am sure "Very High (7 x Slower)" And toolpath prewiev is Maximum. It makes sense that you first said. Thank you



  4. #4
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Aspire poor stl quality

    Very high is not the highest.
    There's also:
    Extremely High (20x Slower)
    and
    Maximum (50x Slower).

    To get these, you need to hold the Shift key when you click on the "New File" icon.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Aspire poor stl quality

Aspire poor stl quality