The toolpath start, or where the machine moves to before it starts cutting, which is the Home Position in Aspire.
I can't seem to figure out if there is a way to change the machine starting point in Aspire. Would appreciate some help!!
Thanks,
Mike
Similar Threads:
The toolpath start, or where the machine moves to before it starts cutting, which is the Home Position in Aspire.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)