Need Help! Machine Starting Point in Aspire


Results 1 to 2 of 2

Thread: Machine Starting Point in Aspire

  1. #1
    Registered
    Join Date
    Dec 2014
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Machine Starting Point in Aspire

    I can't seem to figure out if there is a way to change the machine starting point in Aspire. Would appreciate some help!!
    Thanks,
    Mike

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Machine Starting Point in Aspire

    The toolpath start, or where the machine moves to before it starts cutting, which is the Home Position in Aspire.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Machine Starting Point in Aspire

Machine Starting Point in Aspire