Need Help! Part Location in Aspire


Results 1 to 2 of 2

Thread: Part Location in Aspire

  1. #1
    Registered
    Join Date
    Dec 2016
    Location
    United States
    Posts
    37
    Downloads
    0
    Uploads
    0

    Default Part Location in Aspire

    Hi all,
    I hope this is a simple question! I made several individual 2d parts in Sketchup and then exported the vectors into Aspire which i had the workspace size for 4x8 work area so i could arrange all parts to fit. Does Aspire create the location of the parts so the cnc will know where to cut or is the location set from the axis point in Sketchup?
    Thanks

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Part Location in Aspire

    The part location is exactly where they are shown in your material on the screen in Aspire.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Part Location in Aspire

Part Location in Aspire