The part location is exactly where they are shown in your material on the screen in Aspire.
Hi all,
I hope this is a simple question! I made several individual 2d parts in Sketchup and then exported the vectors into Aspire which i had the workspace size for 4x8 work area so i could arrange all parts to fit. Does Aspire create the location of the parts so the cnc will know where to cut or is the location set from the axis point in Sketchup?
Thanks
Similar Threads:
The part location is exactly where they are shown in your material on the screen in Aspire.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)