CO2 laser machine cut not the real or design distance

Results 1 to 1 of 1

Article: CO2 laser machine cut not the real or design distance

  1. CO2 laser machine cut not the real or design distance

    0 Comments by cncjack01 Published on 03-14-2017 08:22 AM
    CO2 laser machine cut not the real or design distance-1-jpg
    open the RDworks software . User -- read parameter.
    CO2 laser machine cut not the real or design distance-2-jpg
    then do like this . vendor setting. password: rd8888
    CO2 laser machine cut not the real or design distance-3-jpg
    password : rd8888

    CO2 laser machine cut not the real or design distance-4-jpg

    you will see like this .
    CO2 laser machine cut not the real or design distance-5-jpg
    CO2 laser machine cut not the real or design distance-6-jpg
    1 Graph length(mm): you design length .
    2 Measuring length(mm): the real distance .
    Here is an example :
    CO2 laser machine cut not the real or design distance-7-jpg
    After cut ,you measured the real distance is 498*498
    so you can dso like this:
    CO2 laser machine cut not the real or design distance-8-jpg
    Then do not forget to write the parameter change to the machine memory .like the picture show .
    CO2 laser machine cut not the real or design distance-9-jpg

    ok ,finish ,here the example for x axis ,y /z the same steps to change .


    Jinan Blue Elephant CNC Machinery Co.,Ltd
    Contact:Jack
    Email:manager@elephant-cnc.com
    Whatsapp/mobile/Wechat:0086-15064026772
    Skype:elephantcnc
    QQ:3001738567
    Web:Blue Elephant CNC Machinery ? China CNC Routers, Plasma Cutters, Laser Cutters

    Similar Articles:
    CO2 laser machine cut not the real or design distance Attached Thumbnails CO2 laser machine cut not the real or design distance-1-jpg   CO2 laser machine cut not the real or design distance-2-jpg   CO2 laser machine cut not the real or design distance-3-jpg   CO2 laser machine cut not the real or design distance-4-jpg  

    CO2 laser machine cut not the real or design distance-5-jpg   CO2 laser machine cut not the real or design distance-6-jpg   CO2 laser machine cut not the real or design distance-7-jpg   CO2 laser machine cut not the real or design distance-8-jpg  

    CO2 laser machine cut not the real or design distance-9-jpg  

  2. Total Comments 0

    Comments

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CO2 laser machine cut not the real or design distance
CO2 laser machine cut not the real or design distance