Today I did a test copy of the lid backgammon:
aarggh
All separately, as you asked.
Last edited by ygorek; 03-17-2017 at 12:17 PM.
Nice looking clock Ygorek
Russ
I know how many models are downloaded per day, I follow every download, more than 200 downloads a day, if you are so interested!
Do not download ???, then I see no reason to spread!
I, too, can say a lot of things, but I can do absolutely differently!
It is because of people like you that any desire to do something for people disappears !!!
Last edited by ygorek; 03-17-2017 at 05:34 PM.
ygorek forgive, I downloaded several files for personal use only . I do not make money on cnc .Please just change the name of the post with free models to buy to use models because it encourages the downloading without paying
with regards
i'm starting with cnc we will see what will be
It's not a pay to use. It's a donation. If you like the models send ygorek a tip. It's like going to a restaurant to eat. If you like then you tip good. Just a suggestion
Sent from my iPhone using Tapatalk
I answered you:
After milling it is enough to cut through a hole of the desired diameter under your watch.
Or do you need to make a hole in the model in the owl?
I think it's better to drill a hole later, so that the diameter of the clock will fit.
Otherwise, you can not guess with a diameter, you work through the artkam.
Thanks Ygorek, finally just sent a reply, it's been very busy this week.
I've also just glued up some English Oak to machine the dragon clock for my son this weekend, so I should be able to post some pics when done and sanded.
I'm really looking forward to doing that one, thanks again for posting the model!
cheers, Ian
It's a state of mind!
I bought for my money more than 100 high-quality models, spent about 100 dollars!
I'm sorry for you to spread!
Help from you will not arrive.
Aarggh is the best user, it's not a pity for him!
Haven't sanded or oiled it yet, quick pic raw off the machine and I'm pretty happy with the results! Thanks for posting the model Ygorek!
First time I've used European Oak for 3D work, it's an absolute dream to machine, using a 2.5mm ball nose cutter, the timber will barely need any sanding at all!
cheers, Ian
It's a state of mind!