Need Help! CNC 3.0 Shield and NEMA 23 Motors with TB6600 Drivers how to wire

Results 1 to 6 of 6

Thread: CNC 3.0 Shield and NEMA 23 Motors with TB6600 Drivers how to wire

  1. #1
    Registered
    Join Date
    Feb 2009
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default CNC 3.0 Shield and NEMA 23 Motors with TB6600 Drivers how to wire

    I just got a Arduino UNO and CNC Shield 3.0. I am trying to connect the CNC Shield to the TB6600 drivers because I am running 425 oz motors. I have 4 motors total so I am wanting to clone an axis. I can not find any wiring diagram for this type of setup. I am a NOOB at Arduino. I was able to get GRBL flashed to the UNO and I am proud of that.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2015
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: CNC 3.0 Shield and NEMA 23 Motors with TB6600 Drivers how to wire

    I've been having a tough time with grbl in general. I started with the Arduino Due and a gShield to run g2core (based on grbl), but I could never get it to connect to three different computers running three different operating systems. I replaced the Due with an Uno and it connected immediately...on one machine. Still having trouble (but different trouble) on others. People talked me into going the grbl/Arduino route when I didn't want to deal with it, but now that I'm having trouble they are nowhere to be found.

    Anyway, I just wanted to comment to let you know that I understand the kind of frustration you're dealing with (people not responding when you are looking for help), and I hope that a comment will help encourage more activity on your post.



  3. #3
    Registered
    Join Date
    Feb 2009
    Location
    usa
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default

    Thank you for the understanding and comments.



  4. #4
    Registered
    Join Date
    Jun 2016
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: CNC 3.0 Shield and NEMA 23 Motors with TB6600 Drivers how to wire

    Toshiba's IC is used in thousand of different boards, how anyone would know what particular board do you have? Wiring could be as simple as connecting STEP/DIR pins on UNO to corresponding terminals on driver board.

    GRBL wiki-page with pin mapping https://github.com/gnea/grbl/wiki/Connecting-Grbl

    Some examples
    https://plus.google.com/107374903637...WuaTX5S?cfem=1
    Wiring and running TB6600 stepper driver with Arduino - DIY Projects

    Example of connecting driver board in place of A4988/DRV8825 drivers
    Using a Single-Axis TB6560 Stepper Driver With GRBL/RAMPS: 6 Steps

    And the mother of all links
    LMGTFY



  5. #5
    Registered
    Join Date
    Mar 2015
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: CNC 3.0 Shield and NEMA 23 Motors with TB6600 Drivers how to wire

    Hooray, a self-righteous prick to the rescue!!



  6. #6
    Registered
    Join Date
    Jun 2016
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: CNC 3.0 Shield and NEMA 23 Motors with TB6600 Drivers how to wire

    Quote Originally Posted by intjonmiller View Post
    Hooray, a self-righteous prick to the rescue!!

    It's quite obvious why noone wants to help you



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CNC 3.0 Shield and NEMA 23 Motors with TB6600 Drivers how to wire

CNC 3.0 Shield and NEMA 23 Motors with TB6600 Drivers how to wire