I have designed my interface at 800x600 resolution on a 19" monitor.

What's going to happen when I plug this in with a 15" flat screen or an older 15" monitor?

I was reading the Camsoft manual and it was indicating that there could be a "sizing" problem with different monitors..

Does anyone have any experience with this?

EDIT: and one more question, has anyone ever tried to put this thing on dual screens ? WinXP is compatible with this if you have 2 of the same video cards.. Will the camsoft screen split ?

Thanks,
Murphy

Murphy,

You'll be fine with a new monitor of any size. It is the resolution that matters. We have a 105" screen here in our class room and it shows the same as a 17" monitor.

Tech Support
CamSoft Corp.
(951) 674-8100
support@camsoftcorp.com
www.cnccontrols.com

Oh that's a good thing.. Whew! thanks...
I take it you guys have never tried the dual screen thing?
Murphy

Usually you get the same full display, as long as the resolution is the same.
Al